The Shopper Family

Silent E-Drive E-Bike

The Tout Terrain Silent E-Drive System consists of a durable Tout Terrain frame with TBA system, the reliable Pinion gearbox, the whisper quiet Neodrives rear motor and the low maintenance Gates belt drive. Perfect for riders seeking the ride quality of a Tout Terrain with the drive of an E-bike. The placement of the Pinion gearbox makes for a stable ride, while the battery holder is supremely practical. The Neodrives Z20 Motor has 40 Nm of torque and 300% power assist and speeds up to 25 km/h. The V5 battery has a capacity of 500Wh and the ability to charge on downhills, resulting in a range up to 120km.

Pinion Gearbox

The sealed Pinion gearbox is centrally located in the frame, resulting in a low center of gravity and the superb riding experience. Because of the weight distribution, the bicycle handles with exceptionally agility and dynamics. Depending on the application, the gear ratio spans from the urban C1.6 6-gear gearbox with an overall ratio of 295% to the P1.18 premium model with 18 gears and an overall ratio of 636%. Ergonomically, it is suited to both short and long rides with stance widths (Q-factor) of just 166 for C-line and 174 millimeters for P-Line gearboxes. It allows for both sporty as well as efficient riding, as the pedaling power is applied directly into the drivetrain.

27.5" Wheels

The 27.5" wheel size is a great addition to the world of wheel sizes. It allows for extreme versatility and offers an ideal balance between on-road and off-road use. Situated between the classic 26" and 28" (700c) wheel sizes, 27.5" tires are a compromise – in a positive sense. On the plus side, they offer better rolling characteristics and more elegant looks compared to a 26" setup, and more comfort than narrower 28" (700c) tires. These tires also have a significantly lower rotating mass than modern, large-volume 29" tires and thus offer a more lively, more agile riding experience. For us, the 27.5" tires are used in sporty all-road models and in the off-road sector.

Belt Compatible

Free yourself from oily, rusty chains and join the Gates Carbon Drive revolution: Clean, quiet, rugged. Almost no other component has advanced the bicycle as a mode of low-maintenance transport as much as the Gates Carbon Drive belt. Particularly when used year-round, you'll be pleased with its low maintenance as periodic cleaning is all that's required. Belts even last two to three times longer than a chain. Tout Terrain was one of the first manufacuters to offer bicycles with belt drives, and with more than 10 years of experience we have optimized our frames for this purpose. Unlike a chain which can ""unlink"" to fit onto a bike, a belt is seamless, so the frame must "open" to allow it to fit onto the drivetrain. Our belt-specific dropout design is an integral part of the frame and very discrete. The connection is made of stainless steel and will provide a lifetime of reliability.

Thermocrom Tubeset

The Thermocrom tubeset brings our frame construction to the next level. Heat treating the steel allows us to strategically use thinner wall tubing in certain, areas reducing weight without sacrificing durability. We can fine-tune the classic steel ride of each frame to its specific application, balancing weight, stiffness, and compliance. Thermocrom shares virtually all of the characteristics of our Dedacciai tubing, but represents a massive reduction in your bike's overall carbon footprint due to a reduction in the shipment of the raw materials and tubing between countries.

TBA (Pinion Bridge)

The function of the Tout Terrain TBA system is analogous to that of an eccentric bottom bracket - but for bicycles with a Pinion gearbox. The gearbox is rotated about its central suspension screw by a simple pivot. The TBA rotates the gearbox eccentrically, thereby tensioning the chain or belt. The advantages for you lie in the simple operation thanks fixed, rather than more complex sliding or rotating dropouts. Wheels are mounted and removed in the same way as in a traditional rear wheel. Unlike sliding or pivoting dropouts, wheel alignment is also consistent since the dropouts are fixed. The fenders are always the same distance to the tire, since the position of the tire does not change relative to the fender.

T-Coat

Every frame is painted in-house with our robust and high-quality T-Coat powder coating process. This ensures a beautiful and durable finish even under the toughest conditions. The T-Coat consists consist of one, two three layers depending on the component - this allows us to optimise the surface, weight and corrosion characeristics for each use case.